Burlington Electrical Testing


Coordination and Short Circuit Studies

neta

Coordination Studies

A coordination study guards the system against damage incurred from transient over-current, over-voltage and faults that can result in system failure.

Fault Studies

Properly sizing equipment IC rating and over-current protection devices is critical to the safe operation of circuit protection devices in the event of a system problem.

Electrical Energy Conservation Studies

Power system analysis for remediation of power factor harmonics and load balance problems.

Load Flow and Connected Load Studies

Extensive on-site load profile surveys in combination with computer software in order to determine available system capacity and the effects of system switching.

 

NFPA 70E 2015
ARC FLASH HAZARDS

Is your site NFPA 2015 compliant? Is your staff "qualified" or "unqualified" to work on electrical equipment?

Burlington Electrical Testing conducts onsite Arc Flash Hazard Awareness training which provides an understanding of the federal laws (OSHA), potential dangers, as well as the accepted safety practices when personnel are to be exposed to electrical hazards.

This includes defining an arc flash and its effects on the human body, complying with Arc Flash labeling, and the selection and use of Personal Protective Equipment (PPE).

The Arc Flash Hazard Awareness class is to be part of your overall electrical safety program; therefore, your staff will require a working knowledge of the electrical equipment at their facility, along with the tools, test equipment and available PPE.

The one day class is presented by an instructor certified by NFPA, and the NJACT / NECA to instruct Electrical Safety Related Work Practices based on NFPA70E 2015. Curriculum follows the accompanying Electrical Safety-Related Work Practices text modules and will focus on:

1. Electrical Safety Culture
2. Electrical Hazard Awareness
3. OSHA and NFPA 70E concepts
4. Electrical Safety Program
5. The Control of Hazardous Energy
6. Arc Flash Hazard Analysis
7. Personal Protective Equipment
8. Existing Electrical Equipment

For more information, scheduling and quotations please contact
Kelly Baker at:
(215) 826-9400 ext. 227 kellyb@betest.com

About Us

Burlington Electrical Testing is a testing and verification firm with more than 35 years of experience in electrical maintenance testing, acceptance testing, electrical certification, and engineering evaluations of electrical distribution equipment.

Address

Burlington Electrical Testing
300 Cedar Avenue
Croydon, PA 19021
Phone: (215) 826-9400
Emergency: (800) 731-2577
Fax: (215) 826-0964